APPLICATION

재료 유동특성

Material identificationMetallurgical identification of material

Fig. (a) shows predictions of grain size with known material properties and Fig. (b) shows predictions of grain size with material properties calculated by a new material identification scheme, which is based on AFDEX and HyperStudy. The new scheme needs experimental data as input to identify the material. In this study, the experimental input was replaced by the predictions obtained using the known material properties. As can be seen in these two figures, they are very close to each other, implying that the scheme of material identification for predicting microstructural evolution is powerful and economical. 

(a) With known material data

(b) With identified material data

Fig. Comparison of predicted grain sizes

mobile background

소성가공 성형해석에 대해
궁금한 점이 있으신가요?
AFDEX와 함께하세요

궁금하신 점이 있으시다면 언제든 문의해주세요.

WingsTower A1208, 12 Dongbu-ro 169beon-gil, Jinju-si, Gyeongnam-do, Republic of Korea, 52818

경상남도 진주시 동부로169번길 12, 윙스타워 A1208

TEL +82-55-755-7529 FAX +82-55-761-7529
MAIL mfrc@afdex.com