APPLICATION

단조

Die structural analysisDie stresses considering shrink fit, 2D

Elastoplastic finite element prediction of plastic flow problem can also be conducted considering elastic deformation of dies due to not only mechanical load but also shrink fit. This example is one of typical applications to axi-symmetric forging process. All the solutions of dies were obtained at the same time with plastic deformation of the material.


- Design of shrink fit -


- Circumferential stress -


- Circumferential stress -

KSTP Fall 2016.

mobile background

소성가공 성형해석에 대해
궁금한 점이 있으신가요?
AFDEX와 함께하세요

궁금하신 점이 있으시다면 언제든 문의해주세요.

WingsTower A1208, 12 Dongbu-ro 169beon-gil, Jinju-si, Gyeongnam-do, Republic of Korea, 52818

경상남도 진주시 동부로169번길 12, 윙스타워 A1208

TEL +82-55-755-7529 FAX +82-55-761-7529
MAIL mfrc@afdex.com