APPLICATION

단조

Die structural analysisDie elastic deformation in cold forging

Recently some special functions of precision simulation of forging processes with elastic deformation of dies considered was improved, which are now ready to be supported as beta-version for users.

These predictions are typical applications to axi-symmetric cold forging processes. Die structural analysis of the left predictions was conducted using the post-processor after simulating the forging process by rigid-plastic function. Of course, these predictions are quite different from the solutions obtained by the elastoplastic function considering both material and dies at the same time. The maximum displacement of die, 13.7 mm, in this case, cannot be accepted. The solutions are correct but it is owing to the limitation of theory of rigid-plasticity.

Max. Displacement: 13.7 mm

Max. Displacement: 0.4 mm

KSTP Fall 2016

mobile background

소성가공 성형해석에 대해
궁금한 점이 있으신가요?
AFDEX와 함께하세요

궁금하신 점이 있으시다면 언제든 문의해주세요.

WingsTower A1208, 12 Dongbu-ro 169beon-gil, Jinju-si, Gyeongnam-do, Republic of Korea, 52818

경상남도 진주시 동부로169번길 12, 윙스타워 A1208

TEL +82-55-755-7529 FAX +82-55-761-7529
MAIL mfrc@afdex.com